Publicité
Presets
Splitters and Mixers
Splitters and Mixers allow you to split your
signal chain to route your signal to multiple
outputs or add more virtual device blocks to
The Grid.
Tap and hold an empty space on The Grid in order to create a
Splitter/Mixer path that splits the Row in two.
In
1
If you move any block vertically on The Grid between Rows 1 & 2
or 3 & 4, a Splitter/Mixer path will be created automatically.
The Splitter
sets the location where the signal splits.
The Mixer
sets the location where the signal joins a Row
again.
Detailed parameters are available for Splitters and Mixers that
allow for switching between types, shortcut buttons for quick
splits, and an on/off toggle.
The Multi-Out block routes your
signal through XLR Outs 1/2
as well as TRS Outs 3/4, and
USB. It's the default setting for
all Factory Presets and newly
created Presets.
STEREO
Multiple Outputs
1/2 + 3/4 + USB 3/4
Output 1/2
Tap any output block in The Grid
then select "Multiple Outputs"
to enable this feature.
Out
1/2
In
1
34
Publicité
