Publicité
Neural Capture
Using a Neural Capture
Captures can be used by loading a Neural Capture block on The
Grid. Tap an empty space on The Grid and select "Neural Capture"
in the Device Category list.
This will open the Virtual Device Library, where you can navigate
through the different Neural Capture folders. Tap a Neural Capture
in a bank to add it to The Grid.
Tapping a Capture in the Directory immediately displays The Grid
and shows all of the available spaces where ther Capture can be
added. Tap a block to replace it.
In
1
Tap a Capture block to access its parameters.
Neural Capture
LX65 57 Axis
GAIN
BASS
0.71
0.71
•
GAIN [dB]: Determines the gain in the preamp section of the
Capture.
•
BASS [dB]: Affects the low-end of the signal.
•
MID [dB]: Affects the mid-range of the signal.
•
TREBLE [dB]: Affects the high-end of the signal.
•
VOLUME [dB]: Determines the output level of the Capture.
MID
TREBLE
0.71
0.71
Out
1/2
Bypass
Done
VOLUME
0.71
83
Publicité
