Publicité
Modes
In the following example, you can see five device blocks assigned
to different footswitches. Press the footswitches to engage or
disengage the blocks.
E
Multiple devices can be assigned to one footswitch.
There is no limit to the number of devices' bypass status
that can be assigned to a single footswitch.
Footswitch LEDs
Once a block is assigned to a footswitch, the LED will illuminate
corresponding to the color of the assigned block.
The first eight blocks created in the Preset will be assigned to
footswitches automatically. If your Preset has more than eight
blocks, you have to assign the ones you want to control manually.
Navigating through Presets
While using Stomp mode, press the Up and Down footswitches to
navigate through Presets.
Press and hold either the Up or Down footswitch to navigate
through banks. The Preset name and active footswitch will also
blink intermittently. To confirm the change, press the blinking
footswitch.
A
C
F
H
*
Letter-circles are not part of the
actual Quad Cortex display.
55
Publicité
