Publicité
Modes
Scene Mode
Scene Mode allows you to control the settings of any number of
blocks in a rig.
Press the footswitches to navigate through the different Scenes.
You can see the currently active Scene as a
upper-right corner. Tap-and-hold a parameter to assign it to
Scenes
. Scene parameter assignment/changes can be
performed regardless of the current active Mode.
Tap-and-hold a Scene-assigned parameter to prompt the unassign
dialog. Removing the assignment will restore the value from the
main Scene.
Scene A is the default Scene of any new Preset. To change a
Preset's default Scene, just save the Preset with another Scene
loaded.
Preset Grid
Preset 4E - Scene A
4 The Lick
E
In
1
Preset 4E - Scene B
4 The Lick
E
In
1
Preset 4E - Scene C
4 The Lick
E
In
1
letter block
in the
A
SCENE
Out
1/2
B
SCENE
Out
1/2
C
SCENE
Out
1/2
SCENE
Scene Bypass State Behavior
(
)
Settings > Device Options
This feature controls whether
changes to the bypass state
of a block in Scene Mode are
automatically saved to the
active Scene.
By default, all the changes are
overwritten.
A
B
C
52
Publicité
