Installation Of The Minimy Infrared Cabin; Tools Required - Harvia Minimy 120 Basic Instructions D'installation Et D'utilisation

Instructions for installation and use

4. Installation of the MiniMy infrared cabin

Before you begin work, check the parts list to ensure that all the individual parts
have been delivered. If you discover any missing parts, notify your dealer within
14 days of receiving the sauna cabin.
You need an assistant for assembly.
We also advise you to pre-drill the holes for the screws.

4.1. Tools required

● Hammer with a wooden head or a mallet
● Cordless screwdriver with bits for cross-head screws and Torx
● Roller tape measure
● Spirit level
● Punch or wood blocks, 12 mm
● Allen key, 1.5 mm
Pre-drill
Check the right angle:
80 cm
Handle glass with care: Special care must be taken with the edges of
the glass – hardened glass can shatter into small pieces in the event of
impact. Insert protective cushioning (e.g: cardboard box) under the edge
of the glass.
p. 7/36
EN