Operation; Setting Up; Connecting To The App - Pit Boss Pb1300Ps4 Manuel D'instructions

FIGURE 1: P SETTING EDIT SCREEN FIGURE 2: DISPLAY EDIT SCREEN
P Setting Display
Environmetal conditions can affect the internal Set the display screen brightness to your
cooking temperature of the grill. P Setting will preference, and select the temperature scale.
control the auger cycle rate at 82°C/180°F. The Default is set to Fahrenheit (ºF).
default setting is P4. Low outdoor temperatures
have shorter off cycles, using more pellets to
maintain a selected temperature. Select P0-P7 on
this screen.
FIGURE 4: START-UP EDIT SCREEN FIGURE 5: LANGUAGE EDIT SCREEN
Start-Up Language
This option allows the user to change the default Set your regional preference. Default is English.
start-up temperature. The factory setting is French and Spanish are also available.
225°F (107°C). Use the Control Knob to modify
and select a new start-up temperature, then
select ON to activate the new value as your
default start-up temperature.
MENU
FIGURE 7: MENU SCREEN FIGURE 8: HOME SCREEN - PID MODE
Prime Menu Probes
Selecting the Hold option will begin a continuous Displays the temperature reading of the
feed of pellets, to a 30 second maximum. Press programmable meat probe(s) connected: large
it again to stop the auger feed. The timed value is the Actual temperature, small value is
selections will prime for that period length. the Target temperature. The readout corresponds
with the plug-in connection port selected. In
the Probes sub-screen, choose a protein preset
(animal icons) or use the Controller Knob to set
the desired Target temperature of your choice.
PIT BOSS® GRILLS
SETTINGS
FIGURE 3: SCREEN SAVER EDIT SCREEN
Screen Saver
Select a time to put the display brightness to
sleep, then press lock to activate. The display
screen will go into screensaver mode and the
display screen will lock; however, the Actual and
Probe temperatures will remain visible. When
the screen or controller knob is touched, slide to
unlock the display.
FIGURE 6: ABOUT SCREEN
About
Access service and support information about
your unit to relay to Customer Care. Displays
model number, program start-up code, and
unique hardware criteria.
MEAT PROBES
FIGURE 9: PROBES EDIT SCREEN
The preset temperature of each protein is the
safe minimum internal cooking temperature to
ensure doneness.
The outer ring indicates the progress of
completion from the actual temperature to the
desired target temperature, 0-100%. See Using
The Meat Probes for more detail.
8 WWW.PITBOSS-GRILLS.COM

OPERATION

SETTING UP

1. With all outdoor appliances, outside weather conditions play a big
part in the performance of your grill and the cooking time needed
to perfect your meals. This appliance must not be placed under an
overhead combustible ceiling or overhang (A). Keep your grill in an
area clear from combustible materials, gasoline, and other flamma-
ble vapors and liquids.
All Pit Boss® units should keep a minimum clearance of 914mm
(36 inches) from combustible constructions and this clearance
must be maintained while the grill is operational. (B)
2. Parts are located throughout the shipping carton, including under-
neath the grill. Inspect the grill, parts, and hardware blister pack
after removing from the protective shipping carton. Discard all
packaging materials from inside and outside of the grill before as-
sembly, then review and inspect all parts by assembly guide.
If any part is missing or damaged, do not attempt to assem-
ble. Contact your dealer or Pit Boss® Customer Care for parts.
3. Assemble the unit according to assembly guide instructions.

CONNECTING TO THE APP

The app will allow you to control and monitor your grill and meat probe temperatures from your mobile device. Enjoy the
benefits that Pit Boss® mobile connectivity has to offer! Follow these instructions on how to connect your grill to the Pit
Boss® app with your Android™ or iOS® device:
1. Download the Pit Boss® app. Open the app. Follow the instructions and prompts for a smooth setup. New users will
be directed to create an account and login. Choose to "Always allow" location and Bluetooth services for a better
experience with mobile connectivity.
2. Connect your unit to a power source and power on. If you are within Bluetooth range (9m/30 ft), the Pit Boss® app
will automatically detect your unit. click "Add Grill" and select your grill from the models listed. Give your grill a name
(ie. My Smoker) and select "Continue".
3. Select and connect to your Wi-Fi network. The Pit Boss® app needs a 2.4 GHz signal to connect. This will add your
grill model to the list of paired units.
IMPORTANT: Any issues with Wi-Fi connection should be done with your internet service provider. At Pit
Boss®, our support team cannot offer Wi-Fi troubleshooting or assistance.
4. After the mobile connection is confirmed, the app may prompt you to do a firmware update. Select "OK." Firmware
updates allow the programming to continue efficient operation, fix any bugs, and upgrade security features.
5. Once the firmware update is complete, you can begin to control your grill directly through the Pit Boss® app.
WWW.PITBOSS-GRILLS.COM
A B
9 PIT BOSS® GRILLS