Publicité
7.
SETUP AND OPERATION
WARNING: This unit is equipped with a voltage selector
switch. Please check to make sure the voltage selector is set
to match the voltage input.
7.1 Voltage Selection and Fuse Replacement
Select the proper voltage by sliding the voltage switch up
or down
Voltage Range
100V – 120V
220V – 240V
Fuse Replacement: The unit is shipped with the fuse installed. If
the fuse needs to be replaced please follow instructions below:
1. Remove the fuse holder by using a flat head screwdriver to
pry it open.
2. Insert the correct fuse into the fuse box, refer to the
table above.
3. Re-install the fuse holder into the unit.
13
Voltage
Setting
115V
230V
Fuse Rating
2 Amp, Type F
2 Amp, Type F
Publicité
