c-6. Type setting
❖
With the keys
❖
Press
again: the value flashes and can be modified
❖
With the keys
d.) Flow
As the apparatus must control the filtration through the circulating pump control cable, the Flow setting
must always be set to ON.
e.) Calibration mode
•
With the keys
•
Press
again: the value flashes and can be modified
•
With the keys
➢
➢
➢
•
to save the value and return to "Program Menu"
Press
f.) Password
•
With the keys
•
Press
: the current value displays (by default: 0000). If this value remains at 0000, the password is
disabled. Any other value will activate the parameters protection by a password
•
Press
to modify the digit value and press
•
to save the value and return to "Program Menu"
Press
5. Saving the setting(s)
•
From the "Program Menu", press
•
With the keys
Combipool-pHRedox_(Multi) - DOC015452 - Ind. A03 - 23/12/2020
Marque, Modèles et Brevets déposés - Produits exclusifs
or
, select "Type", the current value is displayed on the side (by default: PROP)
or
, set the desired new value and then press
or
, select "Cal", the current value is displayed on the side (by default: Full)
or
, set the desired new value and then press
RECOMMANDED : Full (Buffer solutions kit: pH 4, pH 7, Redox 465 mV)
Easy (Buffer solutions kit: H 7, Redox 465 mV)
Off (Disabled)
or
, select "Password", **** is displayed on the side
or
, select « Save » then
to validate
to validate
to move to another digit
to save and exit
Copyright BIO-UV
Page 35