4. Access to Program Menu
Note: If in the Program Menu no key is pressed for 1 minute, the display is reset without validation of the current
settings.
•
Press simultaneously
•
Release
and
a.) Language selection
•
If you want to choose another language, press
•
Use
or
b.) Redox measurement menu
•
With the keys
•
Press
to enter the menu
•
Once the settings of this menu are done, press
b-1. Rx Setpoint setting
❖
With the keys
720mV)
❖
Press
again: the value flashes and can be modified
❖
With the keys
b-2. Sp type setting (Dosing)
❖
With the keys
❖
Press
again: the value flashes and can be modified
❖
With the keys
b-3. OFA time setting (Over Feeding Alarm = overdose alarm)
❖
With the keys
❖
Press
again: the value flashes and can be modified
❖
With the keys
b-4. ALR band setting
❖
With the keys
100mV)
❖
Press
again: the value flashes and can be modified
❖
With the keys
Combipool-pHRedox_(Multi) - DOC015452 - Ind. A03 - 23/12/2020
Marque, Modèles et Brevets déposés - Produits exclusifs
and
for 5 seconds: "Program Menu" is displayed
: "Language / English" is displayed
to choose another language and press
or
, select "Rx measure"
or
, select "Setpoint", the current value is displayed on the side (by default:
or
, set the desired new value and then press
or
, select "Sp Type", the current value is displayed on the side (by default: Low)
or
, set the desired new value and then press
or
, select "OFA time", the current value is displayed on the side (by default: OFF)
or
, set the desired new value and then press
or
, select "ALR band", the current value is displayed on the side (by default:
or
, set the desired new value and then press
: "English" flashes
to validate it
to return to "Program Menu"
to validate
to validate
to validate
to validate
Copyright BIO-UV
Page 33