Installing The Wall Bracket; Cleaning; Technical Data; What To Do If - Becker Centronic SunWindControl SWC745-II Notice De Montage Et D'utilisation

Installing the wall bracket

Wall bracket
Wall bracket
mounting
plate
Only clean the device with a damp cloth. Do not use cleaning agents,
as they may damage the plastic.
Rated voltage
Battery type
Degree of protection
Permissible ambient temperature
Radio frequency
Problem
Drive is not function‐
ing.
Unlocking mechanism

Cleaning

Technical data

What to do if...?

Cause
Batteries are dead.
Batteries are inser‐
ted incorrectly.
▪ Before installation in the de‐
sired installation position,
check that the transmitter and
receiver are functioning prop‐
erly.
▪ Fix the bracket to the wall with
the two screws enclosed.
3 V DC
LR03 (AAA)
IP 20
-10°C to +55°C
868.3 MHz
Insert new batteries.
Insert batteries cor‐
rectly.
Remedy
63