Becker Centronic SunWindControl SWC745-II Notice De Montage Et D'utilisation page 65

Problem
System does not ex‐
tend automatically
when "AUTO" ap‐
pears on the display.
System does not ex‐
tend manually when
"AUTO" or "MAN‐
UAL" appears on the
display.
Cause
Brightness of sun is
below threshold val‐
ue.
Wind threshold value
exceeded.
Wind threshold value
exceeded.
Sensor or sensor
connection defec‐
tive.
Winter setting is set
to ON.
Remedy
Adjust sun threshold
value.
Wait for the wind to
die down.
Wait for the wind to
die down.
Check sensor.
Set winter setting to
OFF.
65