Becker Centronic SunWindControl SWC745-II Notice De Montage Et D'utilisation page 57

SETTING: SUN INTERM POS, SUN FABRIC TEN‐
SION/TILT, SUN END POSITION
1. You have confirmed the menu item TIME END POSITION. SUN
INTERM POS appears.
2. You can choose between SUN INTERM POS, SUN FABRIC TEN‐
SION/TILT and SUN END POSITION using the +/- button.
3. Confirm your selection with OK.
4. The SUN INTERM POS function is now set.
Note
With this selection, you specify the position to which
the sun protection travels once the sun threshold
value has been exceeded.
5. For details on further programming in the SETTING menu,
please continue reading.
SUN
INTERMEDIATE POSITION
57