General - Becker Centronic SunWindControl SWC745-II Notice De Montage Et D'utilisation

Contents

General

The SWC745-II is compatible with all receivers in the Becker Cen‐
tronic range of control units.
The SWC745-II is already set with the current date and time (CET) on
delivery and controls your sun protection system automatically, de‐
pending on sunlight and wind strength.
Products such as sun protection systems, light controls and remote-
controlled sockets can be operated using the 5 transmission chan‐
nels.
In addition to the 5 individual transmission channels, the SWC745-II
also has 1 central transmission channel which operates transmission
channels 1-5.
The threshold values and shade times can be individually adjusted
for each channel, allowing up to 5 different extend and retract times
or switch-on and switch-off times to be carried out automatically.
Using the intermediate position setting, 2 different positions per
channel can be called up for sun protection applications and 2 dif‐
ferent levels of brightness per channel for a lighting control ("light
scene" control).
Manual operation of the unit is possible at any time.
Please observe these Assembly and Operating Instructions when in‐
stalling and setting the equipment.
35