Installing The Wall Bracket; Changing Batteries - Becker Centronic EasyControl EC715 Notice De Montage Et D'utilisation

Installing the wall bracket

Caution
If mounted in a switch box, the latter must be empty.
Prior to installation, the power supply must be disconnected.
The applicable regulations for electrical installation must be
complied with.
60
You will find the appropriate battery type in the "Technical
data" chapter.
68 - en

Changing batteries

• Before installation in the de-
sired installation position,
check that the transmitter and
receiver are functioning prop-
erly.
• Use two screws to fix the
bracket to the wall.