Programming Additional Transmitters; Installing The Wall Bracket - Becker Centronic SunWindControl SWC441-II Notice De Montage Et D'utilisation

2) Programming additional transmitters

1. Press the programming button of the master transmitter until the re-
ceiver confirms.
2. Then press the programming button of the new transmitter until the re-
ceiver confirms.
3. Now press the programming button of the new transmitter again.
4. The receiver confirms successful programming.

Installing the wall bracket

Wall bracket
Wall bracket
mounting
plate
Unlocking mechanism
• Before installation in the de-
sired installation position,
check that the transmitter and
receiver are functioning prop-
erly.
• Fix the bracket to the wall with
the two screws enclosed.
25 - en