Installing the wall bracket
Caution
If mounted in a switch box, the latter must be empty.
Prior to installation, the power supply must be disconnected.
The applicable regulations for electrical installation must be
complied with.
58,9
Changing batteries
You will find the appropriate battery type in the "Technical
data" chapter.
2.
•
Before installation in the desired
installation position, check that
the transmitter and receiver are
functioning properly.
•
Fix the bracket to the wall with the
two screws enclosed.
1.
Remove the control panel.
2.
Open the battery compartment.
3.
Take out the battery.
1.
4.
Insert the new battery correctly.
5.
Close the battery compart-
ment.
19 - en