Publicité
Les langues disponibles
Les langues disponibles
IST-1424.CE02.02
CONFIGURE (Level 2)
For safety, the outputs are configurable only in configuration or modification of a Sensor, a
Logic Input or a Zone. You cannot configure the outputs separately.
Press
to configure the Logic Input. ------------------------------------------
ENTER
It is recalled that the central CE424P, has only one logic input.
Use
and
to scroll through the various items and then pressing
is highlighted only the value, indicating that you can change it. -----
ENTER
Then, with the numeric keys or with the
the values, while with
same line (where applicable) and then pressing
accepted.
While pressing
restores the previous value and the entire line is highlighted, indicating that you
ESC
can only scroll through the items. The following explains the various items in detail.
Description of items relating to Logic Input:
Indicates how we consider, activated the entrance. LOW means that it is active when
ACTIVE
it is short-circuited (e.g. pushbutton). HIGH means that it is active when open.
Description of items relating to Outputs (relays):
This description is one written in the chapter CONFIGURE SENSORS. Please see page 16
(OUTPUT No, SILENCEABLE, SILENCE T., DELAY ON, DELAY OFF/TIME ON, POS.LOGIC, LATCHED).
At the end of the screen, is written SAVE, to save the configuration inserted. Pressing
confirmation window will appear.
Press again
to confirm. In case you want to go back, press
ENTER
After having confirmed, a window notifies you that the operation has
been successful. -----------------------------------------------------------------------
Then the screen returns the beginning of the management Configure
Logic Inputs.
DELETE (Level 2)
: This item allows you to delete the configuration of the Logic Input.
To delete the input, press the key
item. Pressing again
ENTER
Press
to confirm or to go back, press
ENTER
If this procedure is correct, a window notifies you that the operation has
been successful. -----------------------------------------------------------------------
Then the screen returns the beginning of the Delete item management.
TECNOCONTROL S.r.l. - Via Miglioli, 47 20090 SEGRATE (MI) - Tel. 02. 26 92 28 90 - Fax 02. 21 33 734
CE424P / User Manual
: Press
on the item or simply the key
ENTER
and
and
you move from field to field on the
4
or
on the relevant highlighted
ENTER
the confirmation window will appear. -----------
. -------------------------------
ESC
3
to configure the Logic Input.
you can change
the change is
ENTER
.
ESC
Pag. 28/50
INPUT CONFIG.
1
INPUT
N.
INPUT CONFIG.
INPUT
N.
ACTIVE
:
LOW
OUTPUT N.:
NO
SILENCE MODE :
SILCENCE T. :
DELAY
ON :
DELAY OFF :
ENTER
INPUT CONFIG.
INPUT
N.
1
CONFIGURED
DELETE
1
INPUT
N.
DELETE
CONFIRM ?
YES = ENTER
NO = ESC
DELETE
INPUT
N. 1
DELETED
1
0
0s
0s
0s
the
Publicité
