Unpacking; Installation; Plate Data - Barazza 1ABFY Manuel D'installation Et D'emploi

1.4

Unpacking

Open the box from the top, folding down the flaps to facilitate operations. Then remove the top and corner
protections in polystyrene (fig.1). Extract the protective bag (fig.2), then using the dedicated lifting handles,
extract the device from the box by lifting it upwards (fig.3).
After removing the packaging and before doing anything else, check the integrity of the device. If anomalies
are found, do not turn the device on and contact the Retailer.
The packaging materials must be disposed of in accordance with current legislation in the country of use
and under no circumstances may they be dispersed in the environment.
Lift the device using a suitable means and wearing safety gloves and place it in its designated location.
Remove any protective film, eliminating all adhesive residue using a soft cloth and neutral product. Do not
use scrapers or sponges that may irreparably scratch the surfaces.
Caution! The materials constituting the packaging may be potentially hazardous to children and animals.
2.

INSTALLATION

2.1

Plate data

The characteristics of the device are reported on the ID plate affixed to the side of the device itself (fig. 4).
Fig. 4 - ID plate of device
Note: do not remove, alter, damage or modify the ID plate.
Fig.1 Fig.2 Fig.3
5