11. Attaching The Strips; 12. Mounting The Air Separator; 13. Adjusting The Door Spring - Bosch B18IF800SP Instructions D'installation

en-us

11. Attaching the strips

1. Attach the cover strip (a) on the door.
2. Attach the light switch cover.
The cover can be screwed to the door.
Side-by-Side installation only:
Insert the cover strip into the space between the
appliances.
The cover rail is included in the installation accessories
for side-by-side installation.
22

12. Mounting the air separator

Using the air separator, air which is supplied and
drawn from the appliance is fed separately, in order to
avoid reduced operating capacity.

13. Adjusting the door spring

Rotate the adjusting screw with a cross-head
screwdriver.
I = maximum spring tension
0 = no spring tension
The following are special installation
steps. Instructions are provided after
chapter C.
Door limitation pin, see "Adjusting
the door opening angle".
Installation of the appliance is now
complete.