Pushing The Appliance Into The Installation Niche - Bosch B18IF800SP Instructions D'installation

en-us
1. Pushing the appliance into the
installation niche
CAUTION:
Caution when pushing the appliance into the
installation niche. Do not damage the water line
or power cord.
Note:
When the floor or the appliance is not leveled in
comparison to the installation niche adjust height
adjustable wheels before you move the appliance into
the installation niche.
1. Remove the base panel.
2. Raise the height-adjustable wheels at the back by
approx. / " (10 mm).
3
8
3. Put the electric plug into the socket.
4. Push the water line into the guard tube (a) at the
rear of the appliance.
WARNING:
Be careful, otherwise people who are helping
may be injured or the appliance may be
damaged.
The appliance may tip over while the water
line is pushing into the guard tube (a).
14
5. To prevent the power cord from becoming caught,
tie a piece of string to the middle of the power
cord and feed forwards over the top of the
appliance. When pushing in the appliance, pull the
cable upwards. Take care not to pinch the power
cord
or
using adhesive tape, tape the power cord to the
floor centrally behind the appliance approx. 15"
(380 mm) away from the rear panel of the
installation niche.
6. Carefully push the appliance into the installation
niche.
7. Remove edge protection (if attached).