Installing The Appliance; Preparing The Appliance For First Use; Connecting The Appliance To The Drinking Water Connection; Connecting The Appliance To The Electricity Supply - Bosch B36FD Série Manuel D'utilisation

4.3 Installing the appliance
Install the appliance in accordance with the enclosed in-
▶
stallation instructions.
4.4 Preparing the appliance for first use
Remove the information material.
1.
Remove the protective film and transit bolts, e.g. re-
2.
move the adhesive strips and cardboard.
Clean the appliance for the first time. → Page 21
3.
4.5 Connecting the appliance to the drinking
water connection
Requirements
¡ A shut-off valve must be installed on the water connec-
tion and be freely accessible following installation of the
appliance.
¡ Ensure that the water coming from the water connection
is potable.
Rinse the drinking water connection thoroughly until the
1.
drinking water is no longer cloudy and contains no de-
posits.
If the drinking water is still cloudy or contains deposits,
install an external water filter system.
Install the drinking water connection according to the
2.
enclosed installation instructions.
4.6 Connecting the appliance to the electric-
ity supply
Insert the non-heating appliance plug of the power ca-
1.
ble into the appliance.
Insert the mains plug of the appliance's power cable in a
2.
socket outlet nearby.
The connection data of the appliance can be found on
the rating plate. → "Appliance", Fig.
Check the mains plug is inserted properly.
3.
a The appliance is now ready to use.
/ , Page 9
1
9
Installation and connection en-us
7