Connecting The Appliance To A Wlan Home Network (Wi-Fi) Without Wps Function; Connecting The Appliance To The Home Connect™ App; Checking The Signal Strength; Installing Updates For The Home Connect Soft- Ware - Bosch B36FD Série Manuel D'utilisation

en-us Home Connect™
To do this, take note of the information in the docu-
ments for your router.
a If the connection is successful,
menu setting display.
If the submenu display shows
5.
able to establish a connection to the WLAN home net-
work (Wi-Fi).
Check whether the appliance is located within the
‒
range of the WLAN home network (Wi-Fi).
→ "Checking the signal strength", Page 16
Repeat the process or connect manually
‒
→ Page 16 .
Connect the appliance to the Home Connect app.
6.
→ Page 16
10.2 Connecting the appliance to a WLAN
home network (Wi-Fi) without WPS
function
If your router does not have a WPS function, you can con-
nect the appliance to your WLAN home network (Wi-Fi)
manually. The appliance briefly sets up its own WLAN net-
work. You can connect a mobile device to the WLAN net-
work and transfer the network information for the WLAN
home network (Wi-Fi) to your appliance.
Requirement: The Home Connect™ app has been in-
stalled on your mobile device.
Press .
1.
lights up and the submenu display shows
a
Press / (Submenu) repeatedly until the submenu
2.
display shows and the submenu setting display
shows .
Press (Submenu setting).
3.
a The appliance now sets up its own WLAN network with
the network name "HomeConnect".
a The submenu setting display shows an animation. The
appliance is ready for manual connection to the WLAN
home network (Wi-Fi).
Follow the instructions in the Home Connect™ app on
4.
the mobile device.
a The network information for the WLAN home network
(Wi-Fi) is transferred to the appliance.
a If the connection is successful,
menu setting display.
If the submenu display shows
5.
able to establish a connection to the WLAN home net-
work (Wi-Fi).
Check whether the appliance is located within the
‒
range of the WLAN home network (Wi-Fi).
→ "Checking the signal strength", Page 16
Repeat the process.
‒
10.3 Connecting the appliance to the
Home Connect™ app
If you have automatically connected your appliance to
your WLAN home network (Wi-Fi), you can connect your
appliance to the Home Connect™ app.
Requirements
¡ The appliance is connected to the WLAN home network
(Wi-Fi). → Page 15
¡ The Home Connect™ app has been installed on your
mobile device.
16
flashes in the sub-
, the appliance was un-
⁠ .
flashes in the sub-
, the appliance was un-
Press .
1.
lights up and the submenu display shows
a
Press / (Submenu) repeatedly until the submenu
2.
display shows and the submenu setting display
shows .
Press (Submenu setting).
3.
a The submenu setting display shows an animation.
Follow the instructions in the Home Connect™ app until
4.
the process is complete.
a If the connection is successful, the submenu setting dis-
play shows .
If the submenu setting display shows
5.
was unable to establish a connection to the Home Con-
nect™ app.
In the Home Connect™ app, check whether the mo-
‒
bile device is connected to the WLAN home network
(Wi-Fi).
Repeat the process.
‒
If the submenu setting display shows
6.
Home Connect™ settings. → Page 17
10.4 Checking the signal strength
You should check the signal strength if no connection
could be established.
Press .
1.
lights up and the submenu display shows
a
Press / (Submenu) repeatedly until the submenu
2.
display shows .
a The submenu display shows a value between setting
(no reception) and (full reception).
Press .
3.
Note: The signal strength should be at least .
Improving the reception
If the signal strength is too weak, the connection may be
interrupted.
Carry out one of the solution options:
▶
Place the router and refrigerator closer together.
‒
Ensure that the connection is not interfered with by
‒
screening walls.
Install a repeater to strengthen the signal.
‒
10.5 Installing updates for the Home Con-
nect software
The appliance searches for updates to the Home Con-
nect™ software at regular intervals.
Note: If updates are available, the submenu display
shows .
To cancel the update and reset the submenu display to
the set temperature, press any touch field.
Press .
1.
lights up and the submenu display shows
a
Press / (Submenu) repeatedly until the submenu
2.
display shows and the submenu setting display
shows .
Press (Submenu setting).
3.
a The submenu setting display shows an animation.
a The update is installed.
a The control panel is locked during the installation.
⁠ .
, the appliance
, reset the
⁠ .
⁠ .