Bosch B36FD Série Manuel D'utilisation page 27

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Fault
Water is dripping from the ice and
water dispenser
Ice cube production is low.
The ice and water dispenser is not
functioning.
The appliance hums, bubbles,
buzzes, gargles, clicks, crackles or
rumbles.
The appliance makes noises.
Cause and troubleshooting
Remove the ice residue from the ice chute, for example using a wooden spoon.
Low water pressure.
Check the pressure of the water supply system or the external water filter sys-
tem, e.g. reverse osmosis system.
Connect the appliance only to a water connection with sufficient water pressure.
→  Page 6
The ice and water dispenser is switched off.
Switch on the ice and water dispenser. →  Page 20
The button lock (childproof lock) is switched on
Switch off the button lock. →  Page 20
The ice storage container is not fully inserted.
Fully insert the ice storage container. →  Page 22
Ice cubes are frozen together in the ice chute.
Remove the ice cubes from the ice chute, for example using a wooden spoon.
There is no water supply.
Ensure that there is a water supply and that the shut-off valve on the water con-
nection is open.
Contact an installer if necessary.
Kink in the water hose.
Turn off the water supply and straighten the kink in water hose.
If necessary, replace the water hose.
Fault in the ice and water dispenser.
Switch off the appliance. →  Page 13
1.
Disconnect the appliance from the power supply.
2.
Unplug the power plug or switch off the circuit breaker in the fuse box.
Reconnect the appliance after 5 minutes.
3.
Switch on the appliance. →  Page 13
4.
If the fault persists, call customer service. →  Page 29
5.
Not a fault. A motor is running, e.g. refrigerating unit, fan. Refrigerant is flowing
through the pipes. The motor, switches, solenoid valves or water valves are switch-
ing on or off. Automatic defrosting is running. Ice cubes fall into the ice storage con-
tainer.
No action required.
The appliance is not level.
Align the appliance using a bubble level and the screw feet.
The appliance is not free-standing.
Observe the minimum clearances for the appliance.
Fittings wobble or stick.
Troubleshooting en-us
27

Publicité

Table des Matières
loading

Table des Matières