Bosch B18IF800SP Instructions D'installation page 27

4. Push the appliances together at the front as far as
possible.
5. Loosen the screws on the top of the appliance
and in their place screw on the anti-tip brackets as
installation aid.
6. Pull the appliances together at the top with Water
pump pliers.
7. When the appliances have been completely pulled
together, insert the bar into the upper plates.
8. Pull the appliances together at the bottom with
Water pump pliers.
9. When the appliances have been completely pulled
together, insert the bar into the lower plates.
Use a tool to push the bar in all the way.
10. Remove the installation aids.
11. To attach the cover strip to the attachment plate
(top):
Connect both cover rails to the bolt included in the
Side-by-Side kit.
en-us
27