Attaching The Door Panel - Bosch B18IF800SP Instructions D'installation

en-us
9. Screw on the fixation strips.
9.

Attaching the door panel

Note:
Now attach the furniture handles which are screwed
from behind!
1. Remove the fixing brackets (a) from the appliance
door. To do this, loosen the bracket screws (b)
only.
20
2. Insert removed fixing brackets (a) into the
adjusting rails (b) on the door panel.
3. Open the appliance door.
4. Hang the door panel with adjusting rail over the
double threaded bolts.
5. Lower door panel and push the fixing brackets
down over the fastening screws.
6. Adjust the door panel using the double threaded
bolts (Torx screwdriver). Re-examine the
dimensions of the gap continuously.
7. Close the door and check that the depth of the
door panel is aligned with the adjacent fronts.
If required, correct.
8. Tighten the bracket screws to fix the depth
alignment.