Maintenance And Service; Maintenance And Cleaning; Accessories; After-Sales Service And Application Service - Bosch GCM 8 SJL Professional Notice Originale

34 | English
– Make sure that the depth stop (31) is pressed all the way
in and that the adjusting screw (4) fits through the recess
without touching the depth stop when moving the tool
arm.
– Bring the power tool into the transport position.
– Remove all accessories that cannot be securely fitted to
the power tool. If possible, transport unused saw blades
in an enclosed container.
– Wind up the mains cable and tie it together with the hook-
and-loop strap (59).
– Carry the power tool by the transport handle (3) or hold it
by the recessed handles (27) on the sides of the saw
table.
Only use the transport devices to transport the power
u
tool and never the protective devices.

Maintenance and Service

Maintenance and cleaning

Pull the plug out of the socket before carrying out any
u
work on the power tool.
To ensure safe and efficient operation, always keep
u
the power tool and the ventilation slots clean.
In order to avoid safety hazards, if the power supply cord
needs to be replaced, this must be done by Bosch or by an
after-sales service centre that is authorised to repair Bosch
power tools.
The retracting blade guard must always be able to move
freely and retract automatically. It is therefore important to
keep the area around the retracting blade guard clean at all
times.
Always remove dust and chips after working by blowing out
with compressed air or using a brush.
Clean the guide roller (6) regularly.
To clean the laser unit, turn the laser cover (60) outwards
and remove the dust with a paintbrush (see figure U).

Accessories

Screw clamp
Insert plates
Dust bag
Length stop
Locking screw for length stop
Saw blades for wood and fibreboard, panels and strips
216 x 30 mm saw blade, 48 teeth
Saw blades for plastic and non-ferrous metals
216 x 30 mm saw blade, 80 teeth
216 x 25.4 mm saw blade, 80 teeth
Saw blades for all types of laminate flooring
216 x 30 mm saw blade, 60 teeth
216 x 25.4 mm saw blade, 60 teeth
1 609 92A 5U7 | (14.09.2020)

After-Sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Malaysia
Robert Bosch Sdn. Bhd.(220975-V) PT/SMY
No. 8A, Jalan 13/6
46200 Petaling Jaya
Selangor
Tel.: (03) 79663194
Toll-Free: 1800 880188
Fax: (03) 79583838
E-Mail: kiathoe.chong@my.bosch.com
www.bosch-pt.com.my
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Disposal
The power tool, accessories and packaging should be re-
cycled in an environmentally friendly manner.
Article number
1 609 B04 224
1 609 B03 717
Only for EU countries:
1 609 B05 010
According to the European Directive 2012/19/EU on Waste
Electrical and Electronic Equipment and its implementation
1 609 B02 365
into national law, power tools that are no longer usable must
1 609 B00 263
be collected separately and disposed of in an environment-
ally friendly manner.
2 608 640 641
2 608 640 447
2 608 642 993
2 608 642 133
2 608 642 995
Do not dispose of power tools along with
household waste.
Bosch Power Tools