Identification; Marking; Safety; Designated Use En - Abicor Binzel MasterLiner Maxi Flex/HD Mode D'emploi

MasterLiner Maxi Flex/HD; Basic Flex/HD

1 Identification

The MasterLiner is used in industry and the trade. It is suitable for use in all applications/joining processes involving filler
materials (wires) with a diameter of up to 4 mm.
The following versions are available:
• Maxi Flex/HD
• Basic Flex/HD
Quick connectors and G1/4 connectors can be used with the MasterLiner versions.
These operating instructions only describe the MasterLiner. The MasterLiner must only be operated using original
ABICOR BINZEL spare parts.

1.1 Marking

This product fulfills the requirements that apply to the market to which it has been introduced. A corresponding marking has
been affixed to the product, if required.

2 Safety

The attached safety instructions must be observed.
2.1 Designated use
• The equipment described in these instructions may be used only for the purpose and in the manner described in these
instructions. In doing so, observe the operating, maintenance and servicing conditions.
• Any other use is considered improper.
• Unauthorised modifications or changes to enhance the performance are not permitted.
2.2 Obligations of the operator
• Keep the operating instructions within easy reach at the device for reference and enclose the operating instructions
when handing over the product.
• Putting into operation, operating and maintenance work may only be carried out by qualified personnel. Qualified
personnel are persons who, based on their special training, knowledge, experience and due to their knowledge of the
relevant standards, are able to assess the tasks assigned to them and identify possible dangers
(in Germany see TRBS 1203).
• Keep other persons out of the work area.
• Please observe the accident prevention regulations of the country in question.
• Ensure good lighting of the work area and keep the work area clean.
• Occupational health and safety regulations of the country in question. For example, Germany: Protection Law and the
Company Safety Ordinance
• Regulations on occupational safety and accident prevention
2.3 Personal protective equipment (PPE)
To avoid danger to the user, these instructions recommend the use of personal protective equipment (PPE).
• This consists of protective clothing, safety goggles, a class P3 respiratory mask, protective gloves and safety shoes.
BAL.0510.0 • 2021-08-19
1 Identification
EN - 3