Identification; Marking; Declaration Of Conformity En - Abicor Binzel TCS Compact Mode D'emploi

TCS Compact

1 Identification

The TCS Compact cleaning station is used in industry and the trade to automatically clean the inside of the gas nozzle on
MIG/MAG welding torches. It serves as a preventive measure to extend torch service lives and maintenance intervals.
These operating instructions describe the TCS Compact cleaning station only. The TCS Compact cleaning station must only
be operated using original ABICOR BINZEL spare parts.

1.1 Marking

This product fulfills the requirements that apply to the market to which it has been introduced. A corresponding marking has
been affixed to the product, if required.
1.2 Declaration of Conformity
(EN) EC Declaration of Conformity
Manufacturer
Authorized person for the
technical documentation
This declaration of conformity is issued under the sole responsibility of the manufacturer.
Product Description
Designation
Trade name
The aforementioned object of this Declaration described above, by virtue of its design and construction in the
version we have brought onto the market, complies with the applicable essential health and safety
requirements of the harmonization legislation of the European Union listed below.
This declaration ceases to be valid in case of any modification of the devices without our authorization.
Relevant Union harmonisation
legislation
Harmonized standards used
Harmonized national standards
and technical specifications
Alten-Buseck, 20.09.2021
Signature
Prof. Dr.-Ing. Emil Schubert, Managing Director
Archiving:
BAL.0617.0 • 2021-11-23
Alexander Binzel Schweisstechnik GmbH & Co. KG
Kiesacker
35418 Alten-Buseck
Germany
Address see address of manufacturer
The torch cleaning station is used for automatic cleaning of the gas
nozzle interior and gas nozzle front in MIG/MAG welding torches within a
robot cell.
Torch cleaning station Function
TCS Type
2006/42/EC Machinery
2014/30/EU EMC
2011/65/EU RoHS
ISO 12100:2010
IEC 61000-3-2:2019
IEC 61000-3-3:2013+A1:2019
IEC 61000-6-2:2019
IEC 63000:2018
Document no.: 06-04-2021 20 September-2021
Gas nozzle cleaning
Compact
Source of information
(Filing L96 from 29.03.2014)
(Filing L96 from 29.03.2014)
(Filing L174 from 01.07.2011)
Page 3 of 29
1 Identification
EN - 3