Operation With An External Dmx - Renkforce GM215 Mode D'emploi

Effet projecteur à led
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

f) Operation with an external DMX
Each DMX device of a DMX chain requires a so-called DMX start address in order to be clearly identified
by the controller. This DMX start address defines the first DMX channel to which responds the lighting
effect device. The other control channels follow on this first DMX channel (DMX start address).
The light effect device occupies 4 DMX channels.
Setting the DMX start address
• Press the MENU key as often as is necessary until Addr appears in the display.
• Press the ENTER key.
• Select the desired A001-A512 start address with the key UP, respectively DOWN. Press and hold the +
or - key to carry out accelerated the address setting.
The following tables provide information about the effects of the settings on the individual DMX channels.
4 channel mode
CHANNEL
CH1
14-255
CH2
CH3
CH4
15-255
Value
Function
0
Light off
1-13
Rendering all 1~18 chasers consecutively
Chase mode 1~18 (individual mode)
0-255
Chase speed from slow to fast
0-255
Strobe speed from slow to fast (white light)
0
Auto mode (CH1~CH3 active)
1-14
Rendering all 1~16 sound modes consecutively
Sound mode 1~16 (individual mode)
31

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

1404207

Table des Matières