Explanation Of Symbols; Safety Instructions - Renkforce GM215 Mode D'emploi

3. Explanation of symbols

A triangle containing a lightning symbol indicates a health hazard, e.g., electric shock. The device
does not contain parts that should be serviced by the user. Therefore, do not open the device.
Important information that must always be observed is indicated in these operating instructions
by an exclamation mark.
The arrow symbol indicates special tips and notes on operating the device.
This symbol alerts that the product may only be used indoors.
This symbol on the device indicates that the user should read these operating instructions prior
to putting the device into operation and follow the instructions when using the product.
This symbol indicates the minimum distance to the illuminated surfaces.

4. Safety instructions

Damage due to failure to follow these operating instructions will void the warranty/guarantee.
We assume no liability for subsequent damages.
We do not assume any liability for material and personal damage caused by improper use or
non-compliance with the safety instructions. The warranty/guarantee will be void in such cases.
Dear customer: Not only are the following safety notes and hazard warnings intended to protect
the device, they are also intended to protect your health. Please read carefully through the fol-
lowing points.
• For safety reasons, unauthorised conversion and/or modification to the product is not permit-
ted.
• The device is manufactured according to protection class 1. Only use a standard mains socket
(100 - 240 V, 50/60 Hz connected to the public supply network with an earthed contact as the
voltage source.
• All persons operating, installing, setting up, commissioning or servicing this effect spotlight
device must be appropriately trained and qualified and they must follow these operating in-
structions.
• LED radiation can be dangerous if the LED beam or its reflection enters unprotected eyes.
Therefore, before using the device, familiarise yourself with the statutory regulations and safe-
ty instructions for operating such a LED device.
21