Cleaning; Changing The Battery - Gaggenau CI 292 600 Notice D'utilisation

en-us
Wireless cooking sensor

Cleaning

Do not clean the wireless cooking sensor in the
dishwasher.
Wireless cooking sensor
Clean with a damp cloth. Never put in the dishwasher,
never get wet.
If the wireless cooking sensor is not used, remove it from
the cookware and keep it in a clean, safe place and not
near heat sources.
Silicone patch
Clean and dry before attaching to the wireless cooking
sensor. Suitable for dishwashers.
Note: Do not leave utensils with the silicone patch in
soapy water for long periods of time.
Cooking sensor window
The sensor window must always be clean and dry.
Proceed as follows:
Remove dirt and oil splatters regularly.
▯
For cleaning, use a soft cloth or Q-tips and window
▯
cleaner.
Notes
Do not use abrasive cleaning products such as
▯
scouring pads, scrubbing brushes or cream cleaners.
Do not touch the sensor window with your fingers.
▯
This may make it dirty or scratch it.
28

Changing the battery

If the cooking sensor does not light up when the symbol
is pressed, the battery no longer has a charge.
Replacing the battery:
1.
Remove the silicone cover from the lower section of
the cooking sensor casing and remove both screws
using a screwdriver.
2.
Open the cap on the cooking sensor. Remove the
battery from the lower section of the casing and insert
a new battery (make sure that the battery terminals (+/
-) are the right way round).
9
CAUTION
Do not use metal objects to remove the battery.
Do not touch the battery terminals.
3.
Close the cap on the cooking sensor (the indentations
for the screws on the cap must be aligned with the
indentations on the lower section of the casing).
Tighten the screws with a screwdriver.