en-us
Getting to know your appliance
Elements
Elements
Û /
Single element
$
ò
Tri-circuit element
á
Flexible cooking zone
Only use cookware that is suitable for induction cooking, see section ~ "Cooking with Induction"
Residual heat indicator
The cooktop has a residual heat indicator for each
element. This indicates that an element is still hot. Do not
touch an element while the residual heat indicator is lit
up.
The following indicators are shown depending on the
amount of residual heat:
Display •: High temperature
▯
Display œ: Low temperature
▯
If you remove the cookware from the element during
cooking, the residual heat indicator and the selected heat
setting will flash alternately.
When the element is switched off, the residual heat
indicator will light up. Even after the cooktop has been
switched off, the residual heat indicator will stay lit for as
long as the element is still warm.
16
Use cookware that is a suitable size.
The element switches on automatically when you use cookware with a base
that covers the outer edge of the zone (ð or ò).
See section ~ "Flex function"