Electric Connections - Rizzoli ST Série Manuel D'utilisation

2.7

ELECTRIC CONNECTIONS

The ST 60 model does not require the con-
nection to AC power. The connection to AC
power for ST 90 and STK models, must be
done by experienced people according to
local laws. The installer is responsible for the
correct connection according to safety rules.
To make the connection you have to connect
a network cable to the terminal board situ-
Picture 14 - Position of the terminal board for the
connection to AC power
2.8 HANDRAIL PREDISPOSITION
ST 90 thermal cooker is endowed with
2 mm
handrail on three sides (front, left side, right
side). In some situations it may be necessary
2 mm
Picture 16 - Modification of the handrail
ated in the rear part of the thermal cooker.
The correct connections of line, neutral and
earth must be done as indicated in the pic-
ture. The cable and the other electrical de-
vices must be dimensioned for the electrical
charge to sustain and must not touch points
50° hotter than the ambient temperature.
1
1
2
2
3
3
Picture 15 - Electric terminal board for the connection to
AC power: 1.Line 2.Neutral 3.Earth
40 mm
to remove the handrail from one or more
sides. To make this operation, you need a
star screwdriver and the hex key with the
40 mm
116
30 mm
30 mm