What To Do If; General Declaration Of Conformity - Becker SC211-II Notice De Montage Et D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Problem
The awning retracts every hour, and
can only be moved by holding the
travel button down.
The awning does not extend to the
limit position and then retracts, des-
pite calm conditions.
Awning does not react to wind.
An increase or decrease in the awn-
ing's angle of inclination is not detec-
ted.
The awning extends and then imme-
diately retracts once more every 15
minutes.

General Declaration of Conformity

Becker-Antriebe GmbH declares that the device Centronic SensorControl
SC211-II complies with the fundamental requirements and other relevant
guidelines of Directive R&TTE 1999/5/EC.
Intended for use in the following countries: EU, CH, NO, IS, LI
Subject to technical changes without notice.

What to do if...?

Insert new batteries.
Insert batteries correctly.
Vibration is detected when the awn-
ing is extending. Adjust the wind
threshold on the master transmitter.
Program the SC211-II.
Adjust the wind threshold on the
master transmitter.
The rotary switch for the release
angle is set to "0". Set the release
angle and program the initial angle of
inclination.
There is a high wind and a high sun-
shine level at the same time. Deactiv-
ate the automatic sun protection
Remedy
29 - en

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Centronic sensorcontrol sc211-ii

Table des Matières