Start-Up Sequence - Becker SC211-II Notice De Montage Et D'utilisation

Angle of inclination / Release angle (optional)
The SC211-II detects a gradual increase or decrease in the awning's angle of
inclination relative to the initial angle of inclination e.g., due to rain (formation
of water pools). If the awning reaches the release angle, a retract command is
sent to the receiver.
The rotary switch is used to set the release angle between ± 1° and ± 9° in 1° in-
crements.
The factory default is 0 (off).
Caution
It is essential to follow steps 1-5 in the correct order.
1. Setting the release angle (optional)
2. Assembly
3. Programming the transmitter
4. Setting the thresholds
5. Programming the initial angle of inclination (optional)

Start-up sequence

Release angle, e.g. +2°
Angle of inclination output
Release angle, e.g. -2°
21 - en