Safety Instructions; General Information; Intended Use - Becker SC211-II Notice De Montage Et D'utilisation

The end product manufacturer and fitter have to ensure that all the relevant
current statutory, official and, in particular, EMC regulations are adhered to
during utilisation of our products, especially with regard to end product manu-
facture, installation and customer advice.

General information

•
Please keep the instruction manual safe!
•
Only use unmodified original parts from the control unit manufacturer.
•
Keep children away from control units.
•
Observe all pertinent country-specific regulations.
•
Dispose of exhausted batteries properly. Only replace batteries with the
identical type (see Technical data).
Caution
•
Keep people out of the system's range of travel.
•
If the system is controlled by one or more transmitters,
the system's range of travel must always be visible during
operation.
The SC211-II is intended solely for the operation of an open, half-closed
(semi-cassette), or fully closed (cassette) articulated-arm awning.
For safety reasons, the SC211-II may only be operated with one sun protec-
tion drive with integrated radio receiver. The operation of two or more articu-
lated-arm awnings with one SC211-II is not permitted.
The SC211-II is compatible with the Centronic SunWindControl SWC241-II
hand-held transmitter. Operation using other sun protection controls from the
Centronic range is not recommended.
Use for other purposes or for purposes beyond the above constitutes im-
proper use.
•
Please note that radio-controlled systems may not be used in areas with a
high risk of interference (e.g. hospitals, airports).
18 - en

Safety instructions

Intended use