DAPS−...
9
Care and maintenance
If used as designated in the operating instructions, the device will be free of
maintenance.
10
Dismantling
Warning
Never try to dismantle a semi−rotary drive under pressure.
S Switch the pneumatic circuit pressureless.
Warning
S Switch the tubing system pressureless before dismantling.
1. If necessary, remove any existing limit switches.
2. Remove the pneumatic switching valve.
3. Loosen the screws on the flange of the processing valve.
4. Remove the semi−rotary drive (if necessary including mounting bridge and
coupling extension) from the processing valve.
11
Eliminating faults
Please contact Festo.
28
Festo DAPS−... 0606a English