Conditions Of Use - Festo DAPS- Série Notice D'utilisation

DAPS−...
6

Conditions of use

Warning
S Incorrect handling can result in malfunctioning.
S Make sure that all the instructions in this chapter are observed. The product
will then function correctly and reliably.
The product is not a safety component and must only be used as designated.
S
Use the product in its original state. Unauthorised modification is not
S
permitted.
Make sure that safety measures cannot be ignored.
S
Ensure that all applicable national and local safety laws are adhered to.
S
Remove the packing except for the adhes
S
ive labels on the compressed air connec
tions (to prevent dirt from entering).
The packing is intended for recycling (except for: oiled paper = other waste).
Compare the maximum values specified in these operating instructions with
S
your actual application (e.g. pressures, forces, torques, masses, speeds, tem
peratures). These fastening elements can only be used in accordance with the
relevant safety guidelines if the maximum loading limits are observed.
Take into account the ambient conditions
S
at your location. Corrosive environments
reduce the service life of the product.
Protect the device from fluctuations in pressure and excess operating tempera
S
ture. Use control valves for regulating pressure and excess pressure.
20
Fig. 2
[°C] [%]
Fig. 3
Festo DAPS−... 0606a English
[mbar]