Prerequisites For Use - Festo EGC Serie Notice D'utilisation

EGC-BS-KF, EGC-HD-BS
4

Prerequisites for use

Warning
Unexpectedly fast-moving masses can harm people or property (risk of crushing).
• Apply power to the drive motor, at first limited to low speeds and torques.
Note
Malfunctions will occur if the device is not used correctly.
• It is vital that the stipulations contained in this section are adhered to at all times.
• Take into consideration the legal regulations applicable for the destination, as well as:
– regulations and standards
– regulations of testing organisations and insurers
– national specifications.
• Note the warnings and instructions on the product and in the relevant operating instructions.
• Remove all transport packaging, such as foils, caps and cardboard.
The material used in the packaging is intended for recycling
(exception: oil paper = residual waste).
• Observe the local regulations for environmentally friendly waste management of electronic compon-
ents.
• Take into account the material specifications (
• Use the product in its original state, without any unauthorised product modifications.
• Take into consideration the ambient conditions at the location of use.
Corrosive environments reduce the service life of the product (e.g. ozone).
• Compare the limit values in these operating instructions with those of your application (e.g. forces,
torques, temperatures, masses, speeds).
Operation of the product in compliance with the relevant safety regulations is contingent on adher-
ence to the load limits.
• Take the tolerance of the tightening torques into account. Unless otherwise specified,
the tolerance is ±20%.
24
Technical data chapter).
Festo – EGC-BS-KF, EGC-HD-BS – 1204c English