Pneumatic Installation; Electric Circuit Installation - Festo DAPS- Série Notice D'utilisation

DAPS−...

Pneumatic installation

Connections for the compressed air supply
DAPS semi−rotary drive, double−acting standard design
S
Air supply at connection 2 (A) see Fig. 1 2
Rotational movement of the switching shaft in an anti−clockwide direction.
Air supply at connection 4 (B) see Fig. 1 4
Rotational movement of the switching shaft in a clockwise direction.
DAPS semi−rotary drive, single−acting with spring reset standard design
S
Air supply at connection 2 (A):
Rotational movement in an anti−clockwise direction.
Spring reset:
Rotational movement in a clockwise direction.
Please note
S Fasten a filter element to exhaust connection 4 (B) of the single−acting
semi−rotary drive type DAPS.
In this way no dirt particles can enter the product.

Electric circuit installation

Using the pneumatic switching valves
Please note the instructions and explanations in the relevant operating instruc
S
tions for the pneumatic valves.
26
Festo DAPS−... 0606a English