Sony HT-NT3 Mode D'emploi page 47

 Pair this system and the
BLUETOOTH device again. You may
need to cancel the pairing with this
system using your BLUETOOTH
device first.
 Set [Bluetooth Mode] to [Receiver]
or [Transmitter] (page 25).
Pairing cannot be done.
 Move the BLUETOOTH device closer
to the Bar Speaker.
 Pairing may not be possible if other
BLUETOOTH devices are present
around the Bar Speaker. In this case,
turn off the other BLUETOOTH
devices.
 Delete the system from your
BLUETOOTH device and perform
pairing again (page 12).
NFC function does not work.
 NFC function does not work with
BLUETOOTH-compatible receivers
(such as headphones). To listen to
sound using a BLUETOOTH-
compatible receiver, see "Listening
to sound by transmitting to a
BLUETOOTH-compatible receiver"
(page 14).
Connecting cannot be done.
 The pairing registration information
has been erased. Perform the
pairing operation again (page 12).
There is no sound.
 Make sure this Bar Speaker is not
too far from the BLUETOOTH device,
or this system is not receiving
interference from a Wi-Fi network,
other 2.4 GHz wireless device, or
microwave oven.
 Check that the BLUETOOTH
connection is made properly
between this system and the
BLUETOOTH device.
 Pair this system and the
BLUETOOTH device again.
 Keep the Bar Speaker away from
metal objects or surfaces.
 Make sure [Bluetooth Audio] input
is selected.
 Adjust the volume of the
BLUETOOTH device first, if the
volume level is still too low, adjust
the volume level on the Bar
Speaker.
The sound skips or fluctuates, or the
connection is lost.
 The Bar Speaker and the
BLUETOOTH device are too far
apart.
 If there are obstacles between the
Bar Speaker and your BLUETOOTH
device, remove or avoid the
obstacles.
 If there is device that generates
electromagnetic radiation, such as a
wireless LAN, other BLUETOOTH
device, or a microwave oven
nearby, move them away.
47
US