Network Function; Connecting With A Wired; Network - Sony HT-NT3 Mode D'emploi

Network Function

Connecting with a wired

network

Connecting the system to
the network using a LAN
cable
The following illustration is an example
configuration of a home network with
the system and a server.
LAN cable
(not supplied)
Broadband
router
Server
16
US
ADSL modem/
Cable modem
Internet
LAN cable
(not supplied)
Setting up a wired LAN
connection
You do not need to perform the
following set up if you have performed
the [Easy Network Settings].
1
Press HOME.
The home screen appears on the TV
screen.
2
Press  to select
upper right corner, then press
3
Press / to select [Network
Settings], then press
4
Press / to select [Internet
Settings], then press
5
Press / to select [Wired Setup],
then press
The screen for selecting the IP
address acquisition method
appears on the TV screen.
6
Press / to select [Auto], then
press .
7
Press / to browse information,
then press .
8
Press / to select [Save &
Connect], then press
The system starts connecting to the
network. For details, refer to the
messages that appear on the TV
screen.
If using a fixed IP address
Select [Custom] in step 6, then follow
the on-screen instructions to select
[Specify IP address]. The IP address
input display appears on the TV screen.
Follow the on-screen instructions to
enter the value for [IP Address], then
press to confirm the values.
[Setup] at the
.
.
.
.
.