Sony HT-NT3 Mode D'emploi page 27

[Auto]: Outputs signals from the HDMI
OUT (ARC) jack when the TV is turned on
while the system is in the standby
mode. This setting saves power in the
standby mode compared to the [On]
setting.
[On]: Always output signals from the
HDMI OUT (ARC) jack when the system is
in standby mode. If you connect a TV
other than "BRAVIA", we recommend
you to select this setting.
[Off]: No signals are output when
system is in standby mode. This setting
saves power in the standby mode
compared to the [On] setting.
 [Quick Start/Network Standby]
[On]: Shortens the startup time from
standby mode. You can operate the
system quickly after turning it on.
[Off]: The default setting.
 [Auto Standby]
[On]: Turns on the [Auto Standby]
function. When you do not operate the
system for about 20 minutes, the
system enters standby mode
automatically.
[Off]: Off.
 [Auto Display]
[On]: Automatically displays
information on the screen when
changing the audio signals, picture
mode, etc.
[Off]: Displays information only when
you press DISPLAY.
 [Software Update Notification]
[On]: Sets the system to inform you of
latest software version information
(page 22).
[Off]: Off.
 [Auto Update Settings]
[Auto Update]
[On]: Software update is automatically
executed between 2 a.m. and 5 a.m.
local time in the selected [Time Zone]
while this system is not in use. If you set
[Quick Start/Network Standby] to [Off],
software update is performed after you
turned off the system.
[Off]: Off.
[Time Zone]
Select your country/region.
Note

Depending on the contents of the
updates, software update may be
performed even if you set [Auto Update]
to [Off].

Software update is performed
automatically within 11 days of a new
software release.
 [Device Name]
You can change the name of this system
according to your preference so that it is
more recognizable during BLUETOOTH
or Screen mirroring function. The name
is also used in other network usage such
as Home Network. Follow on-screen
instructions and use software keyboard
to enter the name.
 [System Information]
You can display the system's software
version information and the MAC
address.
 [Software License Information]
You can display the Software License
Information.
27
US