Bluetooth Function; Listening To Music From A; Bluetooth Device - Sony HT-NT3 Mode D'emploi

Masquer les pouces Voir aussi pour HT-NT3:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

BLUETOOTH Function

Listening to music from a

BLUETOOTH device

Pairing this system with a
BLUETOOTH device
Pairing is an operation where
BLUETOOTH devices register with each
other beforehand. Once a pairing
operation is performed, it does not need
to be performed again.
Before you pair the device with this
system, be sure to set the [Bluetooth
Mode] to [Receiver] (page 25).
1
Place the BLUETOOTH device
within 1 meter (3.3 feet) from the
Bar Speaker.
2
Press PAIRING
The blue LED indicator flashes and
the BLUETOOTH pairing screen
appears on the TV screen.
Tip
You can also select [Bluetooth Audio]
from home screen.
3
Set the BLUETOOTH device in
pairing mode.
For details on setting the
BLUETOOTH device in pairing mode,
refer to the operating instructions
supplied with the device.
4
Select "HT-NT3" on the device's
display.
Perform this step within 5 minutes,
otherwise pairing mode will be
canceled.
When the BLUETOOTH connection
is established, device name appears
on the TV screen and the blue LED
indicator lights up.
12
US
.
Note
If passkey is required on the
BLUETOOTH device, enter "0000".
Passkey may be called "Passcode",
"PIN code", "PIN number" or
"Password".
Tip
You can change the system's name
that appears on your device by using
[Device Name] in [System Settings]
(page 27).
5
Start playback on the BLUETOOTH
device.
6
Adjust the volume.
Adjust the volume of the
BLUETOOTH device first, if the
volume level is still too low, adjust
the volume level on the Bar
Speaker.
Note
You can pair up to 9 BLUETOOTH devices. If
the 10th BLUETOOTH device is paired, the
least recently connected device will be
replaced by the new one.
To cancel pairing operation
Press HOME or INPUT +/–.
Connecting to a BLUETOOTH
device from this system
You can connect to the paired
BLUETOOTH device from this system.
Check the following before playing
music:
 The BLUETOOTH function of the
BLUETOOTH device is turned on.
 The pairing has been completed
(page 12).
 The [Bluetooth Mode] is set to
[Receiver] (page 25).

Publicité

Table des Matières
loading

Table des Matières