Ascend X3 Premium Mode D'emploi page 18

ASSEMBLY INSTRUCTIONS
STEP 10
Running board safety removal
Remove the running board safety by unscrewing the E15 bolt located on the
left leg using the Allen wrench (S5). Then, lift the treadmill up all the way,
making sure the piston system is engaged and holds it in place. Completely
remove the safety by unscrewing the E15 bolt located on the inner left side of
the treadmill, near the middle of the length.
Your treadmill is now assembled!
17
ASCEND X3 PREMIUM FOLDABLE TREADMILL