Publicité
Les langues disponibles
Les langues disponibles
14
s)
Use a measuring cup when filling with water.
t)
Always disconnect the egg incubator from power
when topping up with water and when not in use.
u)
In order to improve incubation observe generally
accepted breeding principles.
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there is
still a slight risk of accident or injury when using the
device. Stay alert and use common sense when using
the device.
3. USE GUIDELINES
The egg incubator is designed for incubating fertile
avian eggs. The incubator keeps the eggs at the correct
temperature and humidity required for the embryo to
develop and hatch.
The user is liable for any damage resulting from non-
intended use of the device!
3.1. DEVICE DESCRIPTION
IN-7DDI model
1
2
3
4
IN-48DDI model
1
4
3
2
IN-56DDI, IN-32DDI models
1
2
3
4
EN
IN-96DDI, IN-112DDI models
1
4
2
3
5
Modell IN-96DDI, IN-12DDI
4
1
3
Assembly:
1
IN-88DDI model
4
3
22.03.2023
1.
Cover
2.
Egg tray
3.
Housing
4.
Control panel
5.
Water inlets
IN-7DDI, IN-48DDI, IN-96DDI, IN-112DDI and IN-88DDI
egg incubators include an egg candler as an additional
accessory. The IN-56DDI, IN-12DDI and IN-32DDI features
a built-in egg candler.
Control panel IN-7DDI, IN-88DDI models
1
2
3
6
5
4
7
1.
Temperature display
2.
„Work" diode
3.
„Set" diode
4.
Decrease value button
5.
Increase value button
6.
„Set" button
7.
ON/OFF switch (Applies to model IN-88DDI only)
IN-48DDI, IN-96DDI, IN-112DDI models
3
4
1
2
5
9
8
7
6
1.
Humidity display
2.
Temperature display
3.
„Set" button
4.
Increase value button
5.
ON/OFF switch
6.
Decrease value button
7.
„Reset" button
8.
Display showing time left until next egg rocking
9.
Number of incubation days display
IN-56DDI, IN-32DDI models
1
2
7
4
3
6
5
1.
Display
2.
„Set" button
3.
Increase value button
4.
ON/OFF switch
5.
Decrease value button
6.
Egg candler switch
7.
„Reset" button
22.03.2023
EN
Display description:
1
2
3
8
7
6
5
4
1.
Time countdown until next egg rocking.
2.
Temperature
3.
Humidity
4.
Fan
5.
Low humidity alarm
6.
Heating on
7.
Egg candler light on
8.
Number of incubation days
Control panel IN-12DDI
7
1
2
6
5
8
3
1.
Temperature display
2.
„Work" diode
3.
„Set" diode
4.
Decrease value button
5.
Increase value button
6.
„Set" button
7.
Egg candler
8.
Egg candler switch
Egg candler
1
1.
ON/OFF switch
3.2. PREPARING FOR USE
APPLIANCE LOCATION
The temperature of environment must not be higher than
40°C and the relative humidity should be less than 85%.
Ensure good ventilation in the room in which the device
is being used. There should be at least 10 cm distance
between each side of the device and the wall or other
objects. The device should always be used when positioned
on an even, stable, clean, fireproof and dry surface, and
be out of the reach of children and persons with limited
mental and sensory functions. Position the device such that
you always have access to the power plug. The power cord
connected to the appliance must be properly grounded
and correspond to the technical details on the product
label!
15
4
Publicité
