Ec Declaration Of Conformity - SDMO PRO 2000 Manuel D'utilisation Et D'entretien

8.3. Specifications
Equipment model
Rated/maximum power
Acoustic pressure level at 1 m (LpA)/measurement uncertainty
Engine type
Recommended fuel/fuel tank capacity
Recommended oil/oil sump capacity
Oil cut-out*
Direct current/Alternating current
Circuit breaker**
Socket type***
Spark plug type
Dimensions l x w x h
Weight (without fuel)
This generating set complies with directive 97/68/CE on pollutant emissions.
*Oil cut-out: If there is no oil in the engine sump or if the oil pressure is low, the oil cut-out automatically stops the engine to prevent any
damage. If this occurs, check the engine oil level and top it up if necessary before looking for any other cause of the problem.
**Circuit breaker: The genset's electrical circuit is protected by one or more magnetothermal, differential or thermal cut-out switches. In
the event of an overload and/or short circuit, the supply of electrical energy may be cut.
If necessary, replace the circuit breakers in the generating set with circuit breakers with identical nominal ratings and specifications.

8.4. EC Declaration of conformity

Name and address of manufacturer :
SDMO Industries - 12 bis rue de la Villeneuve - CS 92848 -
29228 BREST Cedex 2 – France.
Product description :
Generating set
L. Courtès, the manufacturer's authorised representative, hereby declares that the product conforms to the following EU Directives:
2006/42/EC Machinery Directive ; 2006/95/EC Low Voltage Directive ; 2004/108/EC Directive on Electromagnetic Compatibility ;
2000/14/EC Directive relating to the Noise Emission of Outdoor Equipment.
Notified body :
ABOMA B.V. Galvanistraat, 1 -
Postbus 141 -6710 BC EDE -
Netherlands
Make :
SDMO
For the directive 2000/14/EC :
Compliance Measured
procedure : sound power level:
Appendix VI. 88 dB(A)
Brest, 01/11/2012
L. Courtès, Assistant Director, Design and Projects.
INVERTER PRO 2000
1600 W / 2000 W
Unleaded petrol / 4.2 L
SAE 10W30 / 0.4 L
12V - 8A / 230V - 7A
1 x 2P+T-230V-10/16A
1 x 12V 8A
49 x 28 x 44.5 cm
Name and address of the person authorised to create and keep
the technical file
L. Courtès - SDMO Industries - 12 bis rue de la Villeneuve -
CS 92848 - 29228 BREST Cedex 2 – France.
Type :
INVERTER PRO 2000
3499231000724
INVERTER PRO 2000 UK
3499231000755
Guaranteed
sound power level (LwA) :
89 dB(A)
INVERTER PRO 2000 UK
75 dB(A) / 0.70
Yamaha MZ80
●
●
2 x 2P+T-230V-16A
1 x 12V 16A
BPR6HS
21 kg
Serial numbers:
7DK 1670101 > 7DK 1671999
7DK 1680101 > 7DK 1695999
7DK 5600101 > 7DK 5605999
Rated output :
1600 W