Installation - Sony MEX-N5300BT Mode D'emploi

Note
Before attaching the double-sided tape , clean
the surface of the dashboard with a dry cloth.
Using the wired remote control
1
To enable the wired remote control,
set [STR CONTROL] in [SET STEERING]
to [PRESET] (page 19).

Installation

Removing the protection collar
and the bracket
Before installing the unit, remove the
protection collar  and the bracket  from
the unit.
1
Pinch both edges of the protection
collar , then pull it out.

2
Insert both release keys  until they
click, and pull down the bracket ,
then pull up the unit to separate.


Face the hook inwards.
38
GB
Mounting the unit in the
dashboard
Before installing, make sure the catches on
both sides of the bracket  are bent
inwards 2 mm ( 3 /
32
1 Position the bracket  inside the
dashboard, then bend the claws
outward for a tight fit.
53 mm (2

2 Mount the unit onto the bracket ,
then attach the protection collar .

Notes
• If the catches are straight or bent outwards, the
unit will not be installed securely and may spring
out.
• Make sure the 4 catches on the protection collar
 are properly engaged in the slots of the unit.
in).
182 mm (7 1 /
1 / in)
8
Catch



in)
4