Canceling The Demo Mode; Basic Setting Operation - Sony MEX-N5300BT Mode D'emploi

Fm/mw/lw cd bluetooth
Masquer les pouces Voir aussi pour MEX-N5300BT:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

1
Activate the Siri function on the
iPhone.
For details, refer to the operating
instructions supplied with the iPhone.
2
Press and hold VOICE for more than
2 seconds.
The voice command display appears.
3
After the iPhone beeps, speak into
the microphone.
The iPhone beeps again, then Siri starts
responding.
To deactivate "Siri Eyes Free"
Press VOICE.
Notes
• The iPhone may not recognize your voice
depending on usage conditions. (For example, if
you are in a moving car.)
• "Siri Eyes Free" may not function properly, or the
response time may lag in locations where iPhone
signals are difficult to receive.
• Depending on the iPhone's operating condition,
"Siri Eyes Free" may not function properly, or may
quit.
• If you play a track with an iPhone using the
BLUETOOTH audio connection, when the track
starts playback via BLUETOOTH, "Siri Eyes Free"
automatically quits and the unit switches to the
BLUETOOTH audio source.
• When "Siri Eyes Free" is activated during audio
playback, the unit may switch to the BLUETOOTH
audio source even if you do not specify a track to
play.
• When connecting the iPhone to the USB port, "Siri
Eyes Free" may not function properly, or may quit.
• When connecting the iPhone to the unit via USB,
do not activate Siri with the iPhone. "Siri Eyes Free"
may not function properly, or may quit.
• There is no audio sound while "Siri Eyes Free" is
activated.
18
GB
Settings

Canceling the DEMO Mode

You can cancel the demonstration display
which appears when the source is off and
the clock is displayed.
1
Press MENU, rotate the control dial to
select [GENERAL], then press it.
2
Rotate the control dial to select [SET
DEMO], then press it.
3
Rotate the control dial to select [SET
DEMO-OFF], then press it.
The setting is complete.
4
Press
(back) twice.
The display returns to normal reception/
play mode.

Basic Setting Operation

You can set items in the following setup
categories:
General setup (GENERAL), Sound setup
(SOUND), Display setup (DISPLAY),
BLUETOOTH setup (BLUETOOTH), "Sony |
Music Center" setup (SONY APP)
1
Press MENU.
2
Rotate the control dial to select the
setup category, then press it.
The items that can be set differ
depending on the source and settings.
3
Rotate the control dial to select the
options, then press it.
To return to the previous display
Press
(back).

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Mex-n4300bt

Table des Matières