Handsfree Calling (Via Bluetooth Only); Receiving A Call; Making A Call - Sony MEX-N5300BT Mode D'emploi

2
Rotate the control dial to select the
desired search category, then press it
to confirm.
3
Repeat step 2 to search the desired
track.
Playback starts.
To exit the "Quick-BrowZer" mode
Press (browse).
Searching by skipping items
(Jump mode)
Not available when a USB device in Android
mode or iPod is connected.
1
During CD or USB playback, press
(browse).
2
Press  (SEEK +).
3
Rotate the control dial to select the
item.
The list is jumped in steps of 10% of the
total number of items.
4
Press ENTER to return to the "Quick-
BrowZer" mode.
The selected item appears.
5
Rotate the control dial to select the
desired item, then press it.
Playback starts.
14
GB
Handsfree Calling (via
BLUETOOTH only)
To use a cellular phone, connect it with this
unit. You can connect two cellular phones to
the unit. For details, see "Preparing a
BLUETOOTH Device" (page 8).

Receiving a Call

1
Press CALL when a call is received
with a ringtone.
The phone call starts.
Note
The ringtone and talker's voice are output from the
front speakers. To select the speakers for handsfree
calling, press MENU, then select [BLUETOOTH] 
[SET VOICE-OUT] (page 21).
To reject the call
Press and hold OFF for 1 second.
To end the call
Press CALL again.

Making a Call

You can make a call from the phonebook or
call history when a cellular phone
supporting PBAP (Phone Book Access
Profile) is connected.
When two cellular phones are connected to
the unit, select either phone.
From the phonebook
1
Press CALL.
When two cellular phones are connected
to the unit, rotate the control dial to
select either phone, then press it.
2
Rotate the control dial to select
[PHONE BOOK], then press it.